7 Common Mistakes People Make with Wedding & Event Fire Safety

7 Common Mistakes People Make with Wedding & Event Fire Safety

Weddings and special events are important occasions in Pakistan. From traditional marriage ceremonies and receptions to corporate functions, exhibitions and family celebrations, these gatherings often bring many people together in decorated halls, marquees, hotels and outdoor venues.

However, event preparations can become so focused on decorations, catering, entertainment and guest arrangements that fire safety receives less attention than it deserves. Temporary electrical installations, decorative fabrics, cooking areas, generators, crowded seating and blocked exits can all create avoidable risks.

A safe event requires more than keeping firefighting equipment somewhere on the premises. Organisers, venue managers, contractors and staff need to understand the venue’s risks, maintain suitable warning systems and make sure guests can leave safely if an emergency occurs.

This article discusses seven common mistakes people make with wedding and event fire safety, explains why they matter and explores practical ways to improve safety at events in Pakistan.

1. Choosing a Venue Without Checking Its Fire Safety Arrangements

One of the most important decisions when organising an event is choosing the venue. People often compare halls, marquees and hotels based on location, decoration, seating capacity, catering and rental costs. However, fire safety should also be part of the selection process.

A beautiful venue may still have problems such as insufficient emergency exits, unclear evacuation routes, unsuitable electrical arrangements or poorly maintained fire detection equipment.

Before confirming a booking, organisers should ask the venue management about its fire safety arrangements. They should understand the approved or assessed occupancy limit, the location of emergency exits and whether the building has suitable warning and emergency arrangements.

Important points to check include:

  • Whether emergency exits are clearly identified.
  • Whether corridors and stairways are accessible.
  • Whether fire detection and alarm equipment is installed where required.
  • Whether emergency lighting is available where necessary.
  • Whether fire safety equipment is maintained.
  • Whether the venue has an emergency evacuation plan.
  • Whether emergency vehicles can reach the premises.

Organisers should also clarify who is responsible for fire safety during the event. Responsibilities may be shared between venue management, event organisers, decorators, caterers and contractors. These arrangements should be agreed before guests arrive.

In Pakistan, applicable requirements can vary according to the building, location and relevant authority. Punjab Civil Defence, for example, identifies fire detection and alarm systems, firefighting arrangements, fire safety plans and emergency exits among the measures considered during inspections of relevant premises.

Better approach: Visit the venue before booking, ask to review its safety arrangements and make sure the planned event is suitable for the available space and facilities.

2. Ignoring the Risks Created by Decorations

Wedding decorations often include fabric, artificial flowers, paper ornaments, wooden structures, banners, lighting features and temporary backdrops. These materials help create an attractive atmosphere, but some may burn easily or contribute to the spread of a fire.

The risk increases when decorations are placed close to electrical equipment, lighting installations, cooking areas or other potential ignition sources. Large decorative structures can also obstruct exits, signs or access routes.

A common mistake is allowing decoration teams to focus only on appearance without considering how their work affects safety.

Event organisers should make sure that:

  • Decorations do not cover emergency exit signs.
  • Fabric and other combustible materials are kept away from heat sources.
  • Decorative installations do not block doors, corridors or stairways.
  • Temporary structures do not interfere with alarm devices or other safety equipment.
  • Electrical decorations are suitable for their intended use.
  • Materials are selected and installed with fire safety in mind.

Marquees and temporary event structures deserve particular attention. Their layout, materials, lighting and exits should be reviewed before people are allowed inside.

Decorators should coordinate with venue management rather than making last-minute changes that could affect escape routes or safety equipment.

Better approach: Include fire safety requirements in the decoration agreement. Inspect the completed decorations before the event begins and correct anything that blocks access or creates an obvious hazard.

3. Overlooking Electrical Safety and Temporary Wiring

Wedding halls and event spaces often require additional electrical equipment for lighting, sound systems, stages, screens, photography, cooling and catering. Outdoor events may also use temporary power arrangements.

If these installations are poorly planned or overloaded, electrical faults can create fire risks. Damaged cables, unsuitable connections, exposed wiring and badly maintained equipment should never be treated as minor issues.

Another mistake is allowing different contractors to install equipment without coordinating their electrical requirements. A venue may have a limited electrical capacity, and additional equipment should not be connected without checking whether the installation is suitable.

Safer event planning includes:

  • Having temporary electrical installations assessed by qualified professionals.
  • Using suitable cables and connectors for the intended equipment.
  • Keeping cables protected and organised.
  • Avoiding overloaded sockets and makeshift connections.
  • Keeping electrical equipment away from water and wet areas.
  • Removing damaged equipment from service.
  • Arranging appropriate checks before the event opens.

The National Electric Power Regulatory Authority (NEPRA) provides public electrical safety awareness guidance that includes avoiding overloaded switches, sockets and plugs and arranging professional inspection of internal wiring.

These principles are relevant to event venues as well as homes and workplaces.

Better approach: Prepare an electrical equipment list with the venue and contractors. Have the power arrangements reviewed by a qualified electrician before the event, especially when temporary lighting, stages or sound equipment are involved.

4. Blocking Emergency Exits with Furniture and Event Equipment

A venue may have suitable emergency exits, but those exits are not useful if guests cannot reach them quickly.

During wedding preparations, chairs, tables, flower stands, stage equipment, catering supplies, gift tables and decorative installations may be placed in corridors or near doors. Sometimes an exit becomes difficult to recognise because it is hidden behind decorations or temporary structures.

Crowd movement can make this problem worse. Guests may gather near entrances, photography areas, food counters or performance spaces, creating congestion.

Emergency routes should remain clear before, during and after the event.

Organisers and venue managers should:

  • Keep emergency exits accessible throughout the function.
  • Avoid placing furniture or decorative structures in corridors.
  • Make sure exit signs remain visible.
  • Keep stairways and doorways clear.
  • Maintain suitable lighting along escape routes.
  • Ensure doors and gates can be used as intended in an emergency.
  • Keep access routes available for emergency responders.

The UK Health and Safety Executive’s event guidance highlights the importance of keeping escape routes available and managing entry, movement and departure safely. These are useful planning principles for event organisers in Pakistan as well.

Guests may not know the venue as well as its employees. Clear signs and visible staff guidance can help people find a safe route without confusion.

Better approach: Conduct a complete walk-through before guests enter. Repeat the check during the event because furniture, catering equipment and guest movement can change the condition of escape routes.

5. Neglecting Fire Detection and Alarm Systems

Another common mistake is assuming that a venue is safe simply because it has a fire extinguisher or a security team. Fire detection and warning arrangements are equally important.

A fire may begin in a kitchen, electrical room, storage space or another area away from the main gathering. Without suitable detection and an effective warning arrangement, people may not become aware of the danger early enough.

A suitable fire alarm system in Pakistan should be selected according to the building’s design, occupancy, risks and applicable requirements. A permanent wedding hall may need a different arrangement from a temporary outdoor event.

Depending on the premises, fire detection and alarm arrangements may include:

  • Smoke or heat detectors in suitable locations.
  • Manual alarm call points.
  • Audible warning devices.
  • Visual warning devices where appropriate.
  • A fire alarm control panel.
  • Backup power arrangements.
  • Inspection and maintenance procedures.

The system should be designed and installed by competent professionals. Detectors must be suitable for the environment, and their positions should be assessed carefully. For example, kitchens and dusty areas may require different detection considerations from ordinary reception spaces.

A further mistake is allowing decorations, temporary partitions or event equipment to interfere with detectors, alarm devices or access to control panels.

The system should be checked according to the manufacturer’s instructions and applicable requirements. If a fault is identified, venue management should arrange professional attention rather than ignoring it until after the event.

Better approach: Ask venue management to confirm that its fire alarm and detection arrangements are operational. Make sure event staff know how to recognise the warning and what action to take when it sounds.

6. Failing to Manage Cooking, Catering and Other Heat Sources

Food is central to many weddings and celebrations in Pakistan. Large events may involve kitchens, buffet stations, temporary cooking areas and catering equipment.

These activities can introduce additional fire hazards, particularly when cooking takes place close to decorations, packaging, fuel supplies or busy guest areas.

A mistake occurs when organisers concentrate on the food service arrangements without checking how the catering area is separated from guest spaces and how its safety is managed.

Caterers and venue managers should coordinate before the event to confirm that:

  • Cooking takes place only in suitable designated areas.
  • Equipment is maintained and used according to instructions.
  • Gas appliances and connections are inspected by qualified people.
  • Combustible materials are kept away from cooking equipment.
  • Cooking and service areas are kept organised.
  • Access to emergency exits remains clear.
  • Staff know how to report a fire or other emergency.

If fuel or other combustible materials are used, storage must follow the relevant safety requirements and manufacturer’s instructions. They should not be placed carelessly beside cooking equipment or electrical installations.

Outdoor catering also requires planning. Temporary kitchens should not obstruct emergency access or create hazards for guests moving around the venue.

Better approach: Include catering arrangements in the event’s safety review. The organiser, venue manager and catering supervisor should agree on the location of cooking activities and their responsibilities before the function begins.

7. Having No Clear Emergency Plan or Trained Event Staff

Even a well-maintained venue can face an emergency. If staff do not understand their responsibilities, guests may receive confusing instructions or struggle to find safe exits.

A written emergency plan is not useful if nobody knows what it says. Event workers, security staff, supervisors and volunteers should understand the basic procedures relevant to their roles.

An event emergency plan should identify:

  • Who is responsible for raising the alarm.
  • Who contacts emergency services.
  • Who gives instructions to guests.
  • Which exits and alternative routes are available.
  • Where guests should gather after evacuation.
  • How people needing additional assistance will be supported.
  • Who will guide emergency responders to the incident location.

The plan should be appropriate for the event’s size and complexity. A small family function may need simpler arrangements than a large wedding reception, exhibition or public celebration.

Staff should be briefed before the event. They should know the location of exits, the meaning of the warning signal and the procedure for directing people away from danger.

The plan should also consider children, older people and people with disabilities or limited mobility. These guests may require additional assistance during an evacuation.

The event’s sound system and entertainment programme should not prevent people from hearing emergency warnings. Staff should know how an emergency announcement will be made if normal entertainment is interrupted.

Better approach: Appoint a responsible event safety coordinator, brief staff before opening and make sure everyone understands that protecting people takes priority over protecting decorations, equipment or property.

Additional Considerations for Outdoor Weddings and Temporary Events

Outdoor events and marquee functions can create different challenges from permanent buildings. Temporary structures, changing weather, uneven ground, temporary electrical installations and limited lighting may affect safety.

Organisers should check the suitability of the site and the layout before setting up the event. They should consider how guests will move between entrances, seating areas, food stations and exits.

Important considerations include:

Temporary structures: Marquees, stages and decorative structures should be suitable for the event and installed by competent contractors.

Lighting: Escape routes and outdoor pathways should remain sufficiently visible, including when an event continues after sunset.

Emergency access: Parking, temporary stalls and equipment should not obstruct access for emergency vehicles.

Guest numbers: The planned attendance should remain within the venue’s safe capacity. Invitations or ticket arrangements should not result in overcrowding.

Weather conditions: Organisers should consider how heat, wind or other weather conditions could affect temporary installations and emergency arrangements.

The venue or site should be reviewed again after setup. A site that looked safe during the planning stage may have changed after contractors install stages, decorations, catering stations and seating.

The Importance of Fire Safety Planning in Pakistan

Pakistan hosts a wide range of events, from small family celebrations to large public gatherings. Each type of event has different safety needs, depending on its location, expected attendance, building design and activities.

The Building Code of Pakistan Fire Safety Provisions 2016 is an important national reference for building fire safety. Local and provincial authorities may also have requirements relevant to particular premises and activities. Event organisers should consult the relevant building management and local authority rather than assuming that identical rules apply everywhere.

Punjab Civil Defence identifies fire detection and alarm systems, firefighting arrangements, fire safety plans and emergency exits among the measures considered in its inspections of relevant premises. Organisers in other areas should check with the authorities responsible for their location.

Fire safety should also be included in contracts with venues and service providers. Agreements can clarify who is responsible for electrical installations, decorations, catering arrangements, safety equipment and emergency coordination.

A Practical Wedding and Event Fire Safety Checklist

Before opening the venue to guests, organisers and venue managers should review the following points:

Venue and layout

  • The venue is suitable for the expected number of guests.
  • Emergency exits are accessible and clearly identified.
  • Corridors, stairs and doorways are unobstructed.
  • Emergency vehicle access is available.

Decorations and electrical equipment

  • Decorations do not block signs or safety equipment.
  • Combustible materials are kept away from heat sources.
  • Temporary electrical arrangements have been professionally checked.
  • Damaged equipment is not being used.

Detection and emergency arrangements

  • Fire detection and alarm systems are maintained.
  • Staff know how to recognise the warning signal.
  • Emergency lighting is available where required.
  • The evacuation plan has been reviewed.
  • Staff responsibilities are clearly assigned.

Catering and guest management

  • Cooking activities take place in suitable areas.
  • Fuel and other combustible materials are stored appropriately.
  • Guest numbers remain within the safe capacity.
  • Staff know how to direct guests towards safe exits.
  • Additional assistance is planned for vulnerable guests.

The checklist should be completed before the event and revisited if the layout or activities change.

What Guests Should Do if a Fire Emergency Occurs

Guests should treat a fire alarm or clear warning of danger seriously. They should stop their activities, follow instructions from venue staff and leave through the nearest safe exit.

People should not use lifts during a fire evacuation or return to collect personal belongings. Once outside, they should move to the designated assembly area and stay clear of emergency access routes.

If someone discovers a fire, they should alert others, raise the alarm if it is safe to do so and contact the relevant emergency service. They should not attempt to handle a fire beyond their training or delay evacuation to protect property.

Event organisers should ensure that emergency responders can reach the venue and receive clear information about the incident.

Conclusion

Wedding and event fire safety can easily be overlooked when organisers are busy arranging decorations, food, entertainment and guest services. However, mistakes involving venue selection, combustible decorations, electrical installations, blocked exits, alarm systems, catering activities and emergency planning can create serious risks.

These problems can be reduced through careful preparation and cooperation between organisers, venue managers, contractors and staff. A suitable fire detection and alarm arrangement, accessible escape routes and a clear evacuation plan should be treated as essential parts of event preparation.

For weddings and public gatherings in Pakistan, the best approach is to make safety part of the planning process from the beginning. A well-organised event should not only look welcoming and run smoothly; it should also provide a safe environment for everyone attending.

Frequently Asked Questions (FAQs)

1. What are the most common fire safety mistakes at weddings?

Common mistakes include choosing a venue without reviewing its safety arrangements, placing decorations near heat sources, using unsafe temporary wiring, blocking emergency exits, neglecting alarm systems and failing to brief event staff about evacuation procedures.

2. Why is a fire alarm system important at wedding venues?

A suitable fire alarm system can warn occupants when a fire is detected, helping them respond and evacuate sooner. The system should be appropriate for the venue, professionally maintained and understood by staff.

3. How can event organisers make decorations safer?

Organisers should ensure that decorations do not obstruct emergency exits, cover warning signs or interfere with safety equipment. Combustible materials should be kept away from heat sources, and temporary structures should be reviewed before guests arrive.

4. What should be included in a wedding event emergency plan?

An emergency plan should explain how to raise the alarm, contact emergency services, direct guests towards safe exits, manage evacuation and assist people who need additional support. It should also identify staff responsibilities and an outdoor assembly point.

5. Who is responsible for fire safety during a wedding or event?

Responsibility may be shared between the venue owner or manager, event organiser, contractors and catering providers. Their duties should be agreed before the event so that inspections, emergency arrangements and staff responsibilities are clear.

Previous Summer Fire Hazards: The Right Way to Use Them

Leave Your Comment